25 Oct
Ryder System
Kitchener
Job Seekers can review the Job Applicant Privacy Policy by clicking
HERE.
Summary
The Technician IV performs major and technically difficult diagnostics, repairs, and overhauls/rebuilds in a timely manner; ensuring quality, time standards, customer expectations, cost guidelines and reliability goals are met.
The T4 works on assignments requiring considerable judgment and mentors other Ryder technicians on a regular basis.
The Technician IV provides the highest level of experience and expertise in vehicle diagnostics and repair.
The position also plays a key role in the leadership, development and training of other grade technicians.
The T4 may specialize in areas such as: refrigeration, electronics, exhaust systems, etc.,
and should possess a combination of extensive vehicle transportation experience, ASE certifications, and/or multiple Ryder Qualifications.
Essential Functions
PERFORMS VEHICLE MAINTENANCE AND REPAIR DUTIES INCLUDING:Performs standard vehicle maintenance
Performs preventive maintenance
Performs complex repairs with minimal (if any) support.
Demonstrate the ability to access and use internal and external maintenance documents
Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable.
Performs remote triage with RCRC and customers to determine best solution to assist roadside breakdowns.
INTERACTS WITH CUSTOMERS/DRIVERS TO PROPERLY DETERMINE THE NATURE OF COMPLAINT ONCE ASSIGNED A TASKInstructs and advises other technicians regarding maintenance repair procedures and diagnostics
Coaches/Mentors other level technicians
Advise shop management and other technicians on shop repairs
Performs facility maintenance duties
Utilizes key functions of Shop Management System and electronic documentation available
Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
Other support duties as required to support operations.
These could include but are not limited to Service Island support.
Additional Responsibilities
TIRE AND WHEEL MAINTENANCE: Tire & Wheel safety trained within 90 days (TW220)Repair and replace tire and wheel assemblies
Perform nail hole repairs
Verify, diagnose and repair tire related ride quality complaints
Perform failure analysis and substantiate premature failure
PREVENTIVE MAINTENANCE:
PM trained and qualified within 90 days (PM230 & PM298)Mentor technicians in complete and efficient PMsConduct quality inspections on PMs
BRAKES-AIR: Brake Air trained and qualified within 90 days (BA220 & BA298)Measure lining thickness
Adjust brakes
Perform air brake sections of P.M.
Perform brake overhaul
Measure drums, rotors, cam bushings
Replace S cams and bushings, slack adjusters and shims
Replace foot and relay valves, air dryers, air tanks, air lines and other similar components
Must meet federal qualifications of brake mechanic and inspectors (FMCS 396.25)Perform failure analysis and substantiate abuse or premature failure
Diagnose and repair all systems and related problems
BRAKES-HYDRAULIC:
Brake Hydraulic trained and qualified within 90 days (BH220 & BH298)* where appropriate
Measure lining thickness
Adjust service brakes
Adjust park brakes
Repair or replace minor parts such as lines
Bleed brake systems
Perform brake shoe replacement
Measure rotors and drums
Inspects and replace wheel cylinders, master cylinders and boosters
Must meet federal qualifications of brake mechanic and inspectors (FMCS 396.25)Perform failure analysis and substantiate abuse or premature failure
A/C, HEATER & REFRIGERATION: A/C recycling and recovery certified within 90 days (CF609) & A/C trained and qualified within 180 days (AC220 & AC298)Perform basic system checks such as power to compressor, condenser obstructions, belt tension, etc.
Identify refrigerant and oil leaks
Operate charging and recovery equipment
Attach manifold gauges
Charge the system according to manufacturer's specification
Meet Federal Refrigeration/AC qualifications
Flush system contaminants
Run OEM performance tests and verify performance
Utilize electrical schematics and Diagnostic procedures to identify correct related problems
Diagnose and repair all systems and related problems
CARGO HANDLING/TRANSFER, LIFTGATES:Perform all mechanical and electrical diagnostics on liftgate
Perform failure analysis and substantiate abuse or premature failure
Repair and replace all liftgate components
CHARGING SYSTEMS: (electrical)
HD electrical trained within 90 days (DR208)Perform full diagnostic charging system including in-depth analysis and corrections
CRANKING SYSTEM: (electrical)Perform in-depth analysis, get to root cause and make corrections
Diagnose and repair all systems and related problems
LIGHTING SYSTEM AND ELECTRICAL ACCESSORIES:Diagnose, isolate and repair lighting system problems such as shorted and open circuits
Diagnose and repair electronically controlled lighting and electrical sub-systems (i.e., SAM cab/body control module)
CLUTCH:Identify proper clutch operation
Identify proper clutch brake operation and adjust
Adjust Hydraulic or mechanical clutches
Remove and replace clutch, throw out bearing, pilot bearing, flywheel, clutch brake, etc.
COOLING SYSTEMS:Diagnose all fan clutch types
Diagnose all control systems
Rebuild fan clutches
Diagnose and repair all systems and related problems
DRIVE AXLES:Perform diagnostics and major repairs as required
Perform failure analysis and substantiate abuse or premature failure
DRIVE LINE:Perform diagnostics and major repairs as required
Perform failure analysis and substantiate abuse or premature failure
DIESEL AND GAS ENGINES - all engines: Identify unusual noises and oil leaksdiagnose, overhaul and replace all assemblies and components as required
Perform failure analysis and substantiate abuse or premature failure
Diagnose and repair emission after treatment components and related sub-systems
FUEL SYSTEMS:Diagnose all fuel system malfunctions
Repair and replace fuel system components including injectors
Diagnose and repair electronically controlled fuel related sub-systems
STEERING AND NON-DRIVEN AXLES AND ALIGNMENT:Perform alignment procedures and adjust as necessary
Diagnose and repair all steering components for wear and/or damage
Check and adjust trailer axle alignment
Adjust wheel bearings
Perform failure analysis and substantiate premature failure
SUSPENSION-CHASSIS AND CAB:Diagnose and repair air leaks
Diagnose and repair suspension and chassis components
Diagnose hard to fund problems and all types of system problems
Maintain, repair and replace all chassis components
Perform failure analysis and substantiate premature failure
VEHICLE COUPLING SYSTEM (PM):Repair and/or replace 5th wheel
Diagnose and repair vehicle coupling components for wear and/or damage
DECISION MAKING:Responsible for making decisions surrounding vehicle diagnostics and repair
Skills and Abilities
Strong mechanical skills
Ability to demonstrate proficiency with advanced diagnostics, overhaul and repair of all vehicle components and systems
Perform all entry level tasks, road test vehicles as necessary
Ability to read and/or listen and understand information and ideas communicated
Strong verbal and written communication skills
Highly thorough and dependable
Available for on call duty and work shift work/weekend
Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
Ability to work independently and as a member of a team
Flexibility to operate and self-driven to excel in a fast-paced environment
Capable of multi-tasking, highly organized, with excellent time management skills
Detail oriented with excellent follow-up practices
Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.advanced required
Qualifications
H.S. diploma/GED preferred
Vocational or Technical Certification preferred Post Secondary degree or Technical Certifications
Basic tools, required
Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:- Routine preventative maintenance, which should include oil changes, brake and tire work- Diagnostics and repairs, including AC, electrical systems,- Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs required
Four (4) years or more relevant work experience preferred
Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.advanced required
Valid Commercial Driver License (CDL) CLASS A, preferred
All other certification as required by location, required
Travel: Safety Sensitive
Non-Regulated Tech
DOT Regulated: Regulated Tech
Description du poste: Si vous êtes mécanicien certifié d'équipements lourds, joignez-vous à Ryder, une entreprise Fortune 500! Ryder est à la recherche d'une personne motivée pour se joindre à notre équipe en tant que technicien certifié.
Le technicien certifié retenu aura ses qualifications de compagnon et sera prêt et désireux d'obtenir son permis MVI.
Ryder offre: - Rémunération concurrentielle - Excellent programme d'avantages sociaux (les employés peuvent choisir leur niveau de couverture: Bronze, Argent, Or) - Régimes de retraite - Options d'achat d'actions - Allocations pour chaussures et outils - Formations de premier ordre (en ligne et pratique) - Vacances - Congé flottant - Compétition des meilleurs techniciens (Ryder Amérique du Nord) - Environnement de travail sécuritaire prouvé par un excellent dossier de sécurité - Possibilité d'avancement - Programme de remboursement de frais de scolarité jusqu'à 3000 $ par année - Paie hebdomadaire Exigences:
- Permis provincial ou interprovincial de mécanicien compagnon (en cours) - Niveau rouge un atout; Admissible et désireux d'obtenir le permis MVI - Consciencieux pour la sécurité, aptitudes pour travailler dans un environnement axé sur la sécurité - Connaissances de la documentation technique de l'entreprise, des bulletins techniques des fournisseurs et des dernières nouveautés des équipements - Maîtrise de tous les outils du métier, connaissance des machines d'atelier, des outils électriques et des équipements électroniques de diagnostic - Bonnes aptitudes informatiques, fiable, orienté vers le travail d'équipe et de solides compétences pour le service à la clientèle - Disponibilité et souplesse pour les quarts de travail de jour, d'après-midi et le week-end - Permis de conduire valide et bon dossier de conduite - Bonne condition et capacité physique Responsabilités: Nous sommes à la recherche d'un technicien de haut calibre, capable de diagnostiquer et réparer une variété de véhicules - Cummins, Detroit, Freightliner, International, Volvo, GMC et Ford.
Un technicien certifié chez Ryder doit être enseignant.
Nous croyons en la croissance de notre talent, et il est important d'avoir de solides techniciens dans nos ateliers pour aider à développer nos futurs techniciens certifiés.
Les tâches spécifiques d'un mécanicien qualifié seront les suivantes: - Dépannage et réparation de camions poids lourds et mi-lourds, diesel et à essence, y compris: - Démontage / réparation de moteurs ou de composantes de moteurs, de transmissions, d'équipements de réfrigération, d'embrayages et autres assemblages - Diagnostic de problèmes d'équipement; identifier et remplacer au besoin des pièces usées ou cassées, effectuer
tous les réglages et alignements nécessaires - Former et développer les apprentis - Aider les techniciens à la lubrification et les employés du service selon les besoins - Maintenir l'atelier propre - Relations clients - traiter avec les clients internes et externes - S'assurer de la satisfaction maximale du client en fournissant un entretien efficace et fiable à nos camions
Job Category: Technicians
Ryder is an equal opportunity employer.
We value Diversity and Inclusion in the workplace and encourage all qualified candidates to apply including women, visible minorities, aboriginals and persons with disabilities.
In accordance with our commitment to diversity and inclusion, Ryder welcomes and encourages applications from people with disabilities.
Accommodations are available on request for candidates taking part in all aspects of the recruitment, selection, and assessment process.
Should you require an accommodation, please inform the Human Resources representative of the nature of the accommodation requested so that we may discuss your needs with you.
If you require assistance in order to apply please contact us at 226-213-4040.
Ryder est un employeur offrant l'équité en matière d'emploi.
Nous valorisons la diversité et l'inclusion en milieu de travail et nous encourageons tous les candidats qualifiés à postuler, y compris les femmes, les minorités visibles, les autochtones et les personnes avec un handicap. (L'emploi du genre masculin dans ce texte ne se veut pas discriminatoire et n'a pour but que de l'alléger)
Conformément à son engagement envers la diversité et l'inclusion, Ryder accueille et encourage les candidatures de personnes handicapées.
Des accommodements peuvent être proposés sur demande pour les candidats qui participent à toutes les sphères du processus de recrutement, de sélection et d'évaluation.
Si vous nécessitez un accommodement, veuillez informer le représentant des ressources humaines de la nature de l'accommodement souhaité afin que nous puissions discuter de vos besoins avec vous.
Si vous avez besoin d'assistance pour postuler, veuillez nous appeler au 226-213-4040.
Job Seekers can review the Job Applicant Privacy Policy by clicking
HERE.
Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as Whats
App or Telegram), or via an online questionnaire.
During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through
www.ryder.com/careers .
Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at
[email protected]
or 800-793-3754.
Current Employees: If you are a current employee at Ryder (not a Contractor or temporary employee through a staffing agency), please click here (http://wd5.myworkday.com/ryder/d/task/1422$3.htmld)
to log in to Workday to apply using the internal application process.
#wd
▶️ Mobile Technician
🖊️ Ryder System
📍 Kitchener